i have a potiac phonix that wont shif and the trani is fine. it is 1983. what i want to know is if i need to get a shop to tear apart the steering colom or if i can do it and just have the parts cost

i have a potiac phonix that wont shif and the trani is fine. it is 1983. what i want to know is if i need to get a shop to tear apart the steering colom or if i can do it and just have the parts cost 2 Answers

What motor mounts should I use, 1978 Phoenix??? 4 Answers

I have a 78 Phoenix which was a v-6 car. V-6 died so I pulled it. I want to use a 1973 pontiac 350 from a firebird to replace it. I have the motor mounts including 2 long bolts still attached to the...

I have a 2002 Pontiac aztek and ive checked the fuses and even the fuse under the hood my rear hatch will not open by key or by button I cant get to my lights in the back if they need to be fixed im not sure what to do when you do push the button or try to turn latch you can hear it trying to work is there a manually way to by pass this thanks 8 Answers

I have a 2002 Pontiac aztek and ive checked the fuses and even the fuse under the hood my rear hatch will not open by key or by button I cant get to my lights in the back if they need to be fixed im n...

I have a 99 pontiac grand am se 3.4L V6. The issue is that it starts and idles fine but as soon as I go to accelerate it just shuts off. It did have overheating issues but right after I fixed those it started doing this. I replaced the cam position sensor and also the engine coolant temp sensor and it didnt help. I was thinking of replacing the ignition coil packs and housi g but not sure if that would fix it. There are no check engine lights or stored codes . 4 Answers

I have a 99 pontiac grand am se 3.4L V6. The issue is that it starts and idles fine but as soon as I go to accelerate it just shuts off. It did have overheating issues but right after I fixed those...

im having a problem, i took apart the caberater on my 1988 fiero and cant find the correct places to put the vaccum lines, i know where they go i just dont know which line to which, it ran fine before i took it apart, now i think that the lines are switched around, can you tell me what goes where or shoow me a site where i can find out, like a car manuel site? 2 Answers

i had to take the valve cover off and that reguired that i take like a senser that is covering one of the bolts, in the process i found that two of my vaccum lines had broken so i took the carb off be...