Chevrolet Silverado 1500 Questions Any type
What Does A Knock Sensor Do In A Chevy Silverado?
chevy silverado 1500 hd
Can You Put A 4.10 Rear End Off A 2500 Silverado 4x4 On A 1500 4x4 Silverad...
I have tried to find a 4.10 rear end for a 1999 Chevy 1500 Silverado without much luck. There seems to be a lot of 4.10 rear ends for the 2500 Silverado available. Can I put the 2500 rear end on the...
Changedmy OPSU And Oil Pump And Filter N Oil And Pressure Still Drops --why...
oil pressure was dropping n bells and whistles were going off changed sending unit and still drops--changed oil pump and filter n oil still drops --but no knocking is there something that needs to b...
I Have A 2004 Chevy Silverado 1500. 5.3 Engine. Need To Replace The Engin...
5.3 v8 engine replacement. 2004 Chevy Silverado 2 wheel drive LS crew cab.
Have A LATE MODEL 2007 Silverado W/4.8 Auto & 4x4. What Year(s) Front Diff ...
LATE MODEL 2007 Silverado w/4.8, auto, & 4x4. I need another front diff as this one is grinding. Can't afford a reman and don't think I can handle doing rebuild myself. Thought I'd buy a used one an...
Power Window Will Not Go Down
On my 1999 Silverado, the left (driver side) window will not go down. The right side is working fine. When I removed the door panel and reversed the wire harness to the window motor, the window went d...
2000 Silverado
trying to replace the instrument cluster. junk yard says there are two types: american and canada. mine is a canadian built and must use the canadian cluster. true?
1997 Z71
I have a 97 z71 silverado 1500. It has 193,000. It has the 5.7 v8. I got it last year and have put about 5k miles on it. I've only changed the oil and front breaks on it. I am uneducated when it c...
Where Do The Air Compressor Support Arms Attach ?
Need to see picture of where the air compressor support arm attaches on a Chevy K1500 5.7 liter engine small block. Can't see where the support arm goes to and from. It's a 1990 truck.
Swapped 10 Bolt To 14 Bolt 4wd Malfunction?
When I engage the 4wd the transfer case becomes hard to take out of gear and the front wheels don't disengage. It is a 14 bolt hd rear end with the same gear (373) as my previous 10 bolt rear end wh...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.