Low Battery Key blinking after replacing battery

my Vehicle was running when I changed the battery and the low battery continued flashing until I turned it off and restarted it . It was fine after that

how do I reset the dashboard message to replace my wireless remote entry FOB battery?

If you have a push button start, get in the car, (without your foot on the break to start it) press the start button twice so that the indicator lights show. Within 5 seconds hold the lock button on your key fob for a few seconds, then release it. You might hear a light click. Then turn the car off. When you start the car, it will be reset. This is a built in reminder for you to check your key fob battery. This doesn't mean your battery is dead. The vehicle has a timer set to remind you to check your battery life. You might want to have your battery tested before you pay to replace it.

Thanks for this info. An added bit that I discovered: I had to also do this reset with my second remote for my Pilot, even though the battery in that one was still good and had not been changed. If both remotes were in the car, I still got the message. Resetting the second one finally got rid of the warning.

I tried this method and it didn't work.

Tried it and worked!

This method worked for my Honda CRV. Thanks.

Does not work on 2016 pilot.

Hi My Honda CR-V remote is working , but light is not blinking when I am using remote

it worked on my Jazz 2006. Thank you.

It wasn't working at first on my 2017 Honda Civic, but then I realized that you have to reset each of the key fobs.

worked perfectly thank you

Didn’t work on 2016 BRV

tried both remotes and still not working

Didn't work at first when using just my one fob, but when I tried again with both fobs, it worked. Thanks.

Worked great!! 2018 CR-V

Thank you, Michael... My wife has a 2016 HR-V, and your solution worked!

Thank you, I think you need to keep the start button held down while pressing the lock on the remote to reset.

Did not work on my 2015 Accord. Tried different methods but still did not reset. Tried using both FOBS.

No luck with 2014 Accord. No icon with 2nd fob that has old battery. Flashing icon with 1st fob that has new 3V battery. The car is detecting something with 1st fob. Is there a way to reset the fob?

Didn’t work.

Yay!!! Whew!!! THAT was scary before I found this answer!!!!Worked like a charm!:)

2015 Honda Fit, didn't work pressing start twice, WORKED with pressing start once and holding down "lock" on both fobs.