I am interested in replacing the wheels on my Ford Crown Victoria Police Interceptor with 18" wheels from a Dodge Charger , is this possible ?
The bolt pattern on a crown vic is 5x114 and bolt pattern I think is 5x115 may look it up on tirerack.com search for wheels for the charger you may be able to do it I put the grand prix wheels which are 20" bolt pattern 5x115 on my 04 crown vic they look perfect
Thank you , Sounds great !
THAT ANSWER IS VERY WRONG. TIRE AND WHEEL MEASUREMENTS ARE A COMBINATION OF IMPERIAL AND METRIC MEASUREMENTS. WHEEL DIAMETER AND LUG NUT OR BOLT CIRCLE DIAMETER MEASUREMENTS ARE IN IMPERIAL MEASUREMENTS RATHER THAN METERIC. THESE VEHICLES USE A 4.5 IN LUG PATTERN. IF YOU CONVERT TO METRIC ITS 114.3MM, WHICH MAY BE ROUNDED TO 114 OR 115MM. TIRE WIDTH IS MEASURED IN DIAMETER AND SO IS WHEEL OFFSET. TIRE SIDE WALLS ARE MEASURED FROM THE INNER DIAMETER OF THE TIRE BEED TO THE TREAD SURFACE WHERE THE RUBBER MEETS THE ROAD, UNINSTALLED HEIGHT, IN PERCENTAGE OF ROAD SURFACE WIDTH.
Looking for a Used Crown Victoria in your area?
CarGurus has 1,654 nationwide Crown Victoria listings starting at $1,950.
Search Ford Crown Victoria Questions
Ford Crown Victoria Experts