Have a 2003 Dodge neon cranks but won't start I replaced the crankshaft sensor was told that was the problem an still doing the same thing

Asked by Robertkessler Dec 19, 2018 at 06:47 PM about the 2003 Dodge Neon SE Sedan FWD

Question type: Maintenance & Repair

What is wrong with my car need it to get to
work

7,455

Brian answered 5 years ago

Would have a look at your fuses if you have not already done so. If you have a volt meter test the camshaft sensor to make sure that is putting out the correct voltage or any at all. There are some how to's online for this. The other idea might be the fuel cut off relay. Would check for power there if no gas to the rail. See if your getting power there. It may be possible to run a jumper there temporarily just to see if it runs. The back or side of the relay should show in schematic form how the relay is wired. Hopefully it's not module related and it's something simple like the relay. Good Luck!

Mark helpful

Your Answer:

Have a 2003 Dodge neon cranks but won't start I replaced the crankshaft sensor was told that was the problem an still doing the same thing 1 Answer

What is wrong with my car need it to get to work

2003 Dodge Neon SE Sedan FWD

-

Maintenance & Repair
We just purchased a used 1995 Dodge Neon and we are having problems with it. The problem is the car will drive for approximately 15 to 20 minutes and the engine begins to jump and miss. When this occurs, we stop the car and let it cool for 10 to 15 minutes and then it will go for about 8 miles (10 to 15 minutes) and will start missing and jumping again. We took it to advance auto and they used a computer diagnostic machine and told us the ignition coil was malfunctioning, so we replaced it but it is still doing the same thing (missing and jumping). My wife says she smells a gas/fuel smell when it starts. Also, thought I had water in the gas tank, so I used dry gas but that didn't help either. Do the 1995 Neon's have a particular problem that sounds like mine? Thank you for any help you can give. 5 Answers

We are also having problems with the dashboard instrument lights and panel are not working. They also work on and off.

1995 Dodge Neon Sport Coupe FWD

-

Maintenance & Repair
If i changed a camshaft sensor on an 05 dodge neon and is still doing the same thing what could it be? 4 Answers

Changed a camshaft senor on an 05 dodge neon and its still having the same symptoms, when the sensor begins too fail while the car is moving there is a jerking while losing power. So what else could...

2005 Dodge Neon SXT Sedan FWD

-

Maintenance & Repair
I have a 2004 Dodge Neon it's a 2.0 and I replaced the camshaft position sensor and the throttle body position sensor because that's what it was telling the computer when I hooked it up at AutoZone. I replaced 1 Answer

I have a 2004 Dodge Neon it's a 2.0 automatic and the check engine light came on so I hooked it up at AutoZone and they told me it was telling them it was the camshaft position sensor so I change t...

2004 Dodge Neon SXT Sedan FWD

-

Maintenance & Repair
2003 Dodge Neon cranks but won't start 4 Answers

My Neon cranks but won't start. I'm not sure if it's the spark plugs or maybe fuel filter, how can I tell what to replace

2003 Dodge Neon SXT Sedan FWD

-

Maintenance & Repair

Own this car?

Share your experience with others.

2003 Dodge Neon

Write a car review

Review another car

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

Have a 2003 Dodge neon cranks but won't start I replaced the crankshaft sensor was told that was the problem an still doing the same thing

1 Answer

Your Answer:

Own this car?

Share your experience with others.

Shortcuts

Search Dodge Neon Questions

CarGurus Experts

Know more, shop wisely

Related Models For Sale

Used Cars For Sale

Have a 2003 Dodge neon cranks but won't start I replaced the crankshaft sensor was told that was the problem an still doing the same thing

1 Answer

Your Answer:

Related Questions