I have a 1996 Chevy k1500 and my front left cv shaft is broke would I be able to take it out and still be able to drive it

I have a 1996 Chevy k1500 and my front left cv shaft is broke would I be able to take it out and still be able to drive it 3 Answers

If I am taking a 350 from a 95 c1500 will I be able to put it into a 98 k1500? 4 Answers

If I am taking a 350 from a c1500 will I be able to put it into a 98 k1500?

Newb with a Q I have a 1996 chevy 1500 and need to take the bench seat out to work on the floor board. How hard is it and do I need special tools? 3 Answers

V6 engine 2 wheel drive (?) OLD truck Already had replaced radiator, upper oil seals (?) need to do the lower ones sometime the brake line broke this morning so that's coming up really soon. Need ...

how easy is it for the oil pump drive shaft to be inadvertently rotated while heads are off and distributor is out 19 Answers

Had to replace head gaskets in my 350. HEI cap was marked for position from the outside and picture taken to ensure proper replacement. Cap and shaft were removed - plugs stayed hooked up and numbere...

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...