What do I check next?
I can get the car to run(not well) by spraying
gas into s vacuum port so there is no
ignition problem but the injectors aren't
operating. I have swapped the crankshaft
position sensor with a known good one and
same result so that is not the problem. One
question is, is there supposed to be voltage
going to the crank sensor? I have checked
continuity through the wires but there is no
voltage through either wire with ignition in
run position our in cranking position. I have
checked injector wiring with noid lights, and
they're not getting signal. There is voltage
getting to the injectors but no flash with
noid light. I have checked fuel pressure
already(45 psi). WHAT DO I TRY NEXT?
Have you checked all ecm fuses? Have you checked fuel pump operation and pressure?
Yes, I checked ecm fuse and it had 45 psi fuel pressure.
Search Chevrolet Cavalier Questions
Chevrolet Cavalier Experts
Related Models For Sale