no start 98 ram 5.9 no spark scanner - will not link up with computor
98 ram have replaced crankshaft senor-cam senor no spark to plugs no link to computor
hace voltage going to coil but not out when ign key turns on fuel pump stays running when
cranking i have fuel pressure can smell fuel fom tailpipe batt is ok no blown fues
Had similar problem. It was the ecm.
thanks that my next move to get another ecm then after that to either replace the rear end housing or find the axle flange since the flange is egg shaped i might try using a big hammer to straighten it out ill use the axle seal as a template
Search Dodge Ram 1500 Questions
Dodge Ram 1500 Experts