Upgrading to a bbk 70mm on 1990 crown vic
So i have it all on came to issue the throttle cable
and transmision kick down cable are reversed on
the spring loaded throttle lever on bottom side
amd wont work properly any ideas on what i
should do
Easy fix is to put the stock throttle body back on the car.
I did this grind off nipple stem part on bottom then drill hole in center where other hole should b then I just sused thin bolt n nut to connect it the kick down cable will fit in other hole wirh its post n Carter pin,, one thing is i had to shorten length of kick down ΔΊ 1cable adjustable to compensate for extra 20mm or so it will open farther than stock 50mm so it wont kick down if not adjusted the fly range is more other than that i noticed slight power improvement but overall better gas mileage?? Idk why
