abs light on a 2002 ford focus after replacing spindle and drum and nut was not on before replacing

abs light on a 2002 ford focus after replacing spindle and drum and nut was not on before replacing 3 Answers

replaced rear bearings on 2002 Focus, now brakes not completely releasing, hot, ABS light on 2 Answers

replaced rear wheel bearings on 2002 Focus, now brakes not completely releasing, get hot and the ABS light is on, Also was on when bearing went out.

Check engine light on after replacing starter 3 Answers

My mechanic just replaced my starter and now the check engine light is on. Prior to picking up my car, he asked me if the light was on when I brought it in. I told him absolutely NOT He, of course...

My windshield wipers and windows and heater stopped working at once on a 2002 ford focus 3 Answers

Could it be the ignition switch? Recently sometimes I have to wiggle the key before it will catch and crank. Or could I have a relay or fuses go out at once

Broken fuel line and issues on an 06 ford focus 1 Answer

I have an 06 ford focus 2.0 zx4. CEL popped on and autozone ran it as the bottom o2 sensor needed to be replaced. I rented the tool and did it myself. When replacing it i made a horrible mistake ...