I NEED TO KNOW THE PINN OUT FOR THE SECONDARY IGNITION SWITCH, NOT THE CYLINDER KEY SWITCH, BUT THE SWITCH MOUNTED UNDER THE DASH ON THE STEERING COLLUMN THAT IS ACTUATED BY THE CYLLINDER VIA A PUSH ROD. IT IS A 1988 CHEVY SCOTTSDALE 4X4 PICK UP K2500 350 ENGINE 5 SPEED MANUAL SHIFT ON THE FLOOR. IT IS MISSING THE CONNECTOR OFF THE WIREING AFTER A FAILED ATTEMPT TO ADDAPT THE WIRES TO A STEERING COLLUMN THAT HAS BEEN INSTALLED THAT CAME FROM A 1997 SUBURBAN. NOW I JUST NEED TO MAKE IT RUN SO I CAN WORK. IT RAN OK FOR THE LAST MONTH ACTUATING THE OLD SWITCH BY HAND TO START IT. I NEED TO GET BACK THERE. I NEED TO KNOW WHICH PINS I CONNECT WHICH WIRES ON THE OLD SWITCH. I NEED TO WORK TOMORROW ! HELP PLEASE !