how do I disconnect the chime for the motor, where do I install a new oil line for manual oil gauge on block.
My oil pressure gauge drops below 5 pounds when at an idle, but as soon as I accelerate the pressure goes up to normal readings. The oil is full, and there is no engine noise with low pressure. The issue is I think the screen below the sending unit is blocked , and I want to install a manual oil pressure gauge. My question is where do I put a new oil pressure line for the gauge on the block to get a accurate reading, and how do I disconnect the chime , because I cant stand that noise everytime I get to an intersection and the oil pressure drops to 5.
real helpful guys ! no answer
I had the same problem with mine, remove the pan and the oil pick up tube has an "0" ring that goes bad and sucks air , where the tube turns 90°at the front of the motor, you can't miss it , there's only one break in that tube.
My 2009 silverado is using a quart of oil between changes but no smoke and no engine knock
Looking for a Used Silverado 1500 in your area?
CarGurus has 155,656 nationwide Silverado 1500 listings starting at $1,000.
Search Chevrolet Silverado 1500 Questions
Chevrolet Silverado 1500 Experts
Related Models For Sale
Used Cars For Sale