i replaced my throttle positioning sensor. i may have to change the pressure sensor on my fuel tank. my service engine light is on and my truck stalls as if it is not getting any fuel.how do i bypass
tps replaced..if i start my truck and the service engine light is on my truck will stall out. if the service light is off the truck is fine. i know it is a sensor but how can i bypass it...if i keep my foot on the gas the truck will run as soon as it goes into idle it stalls..help!!!
how do i pull the o2 sensor?i dont know too much about doing my own work but i can find my way around
The O2 sensor is not used during start up. At start up, the ECU is in "open loop" mode and the engine sees a rich fuel mixture. After the engine gets some heat in it, the ECU switches to "closed loop" and the O2 sensor controls the fuel mixture ratio.
tenspeed, I am still paralyzed by the breadth of your knowledge~
Find out what the code is, it will be stored in the history on the pcm.
Looking for a Used Silverado 1500 in your area?
CarGurus has 143,344 nationwide Silverado 1500 listings starting at $1,195.
Search Chevrolet Silverado 1500 Questions
Chevrolet Silverado 1500 Experts