86 Camaro 2.8 V6
Replaced ECU, Distributor w/module& cap
& rotar, new coil. New fuel pump. Still no
spark or check engine lights coming on to
do diagnostic. No oil light or temp light. I
ordered ignition switch and waiting for it to
come in as that controls everything. Motor
cranks fine and head lights and dash lights
come on, brake and turn signal lights work.
I have worked on cars all my life and I'm 45
yrs old and if the ign. Switch isn't the cure.
Guess it's to the bone yard. I hate to but it's
just to time consuming and like a boat,
passing one away. Checked all fuses with
test light, power on both sides. Power to
distributor wire and coil.
By any chance...... could the oil pressure sending unit be bad, telling the engine not to run? It seems like you're done everything else.
Search Chevrolet Camaro Questions
Chevrolet Camaro Experts