- Home
- / Questions
- / Maintenance & Repair
- / I have a 1998 dodge ram 1500 extended cab and it will start then almost immediatly die. We have chan...
I have a 1998 dodge ram 1500 extended cab and it will start then almost immediatly die. We have changed the map censor, throttle censor, and the fuel pump and still not running please help!!!!
2 Answers
Your Answer
Related Questions
-
I have a 1998 dodge ram 1500 extended cab and it will start then almost immediatly die. We have changed the map censor, throttle censor, and the fuel pump and still not running please help!!!! 2 answers
Maintenance & Repair
-
I have a 1998 dodge ram 1500 5.9L Magnum, I have to push accelerator to start it but will die when i come off throttle, Is this a common problem, and if so, whats the solution? Thanks 2 answers
Was starting just fine until I filled it up with fuel, now I have to put foot on accelerator to start it, and it wants to die when i remove my foot, i finally got it to idle, left it running for abo...
1998 Dodge Ram 1500 2 Dr Laramie SLT 4WD Extended Cab LB
-
Maintenance & Repair
-
I have a 2000chevy malibu it has a code 1374pb I've changed the crank position censor and the cam position censor spark plugs and wires all the coils what else can it be can someone help 1 answer
I've even changed the throttle censor
2000 Chevrolet Malibu Base
-
Maintenance & Repair
-
i have a 2002 dodge 1500, 4.7. It will crank but not start, replaced the CAMshaft and crankshaft senors, replace all plugs, fuel tested ok, we can here the fuel pump engage, we have spark and that last thing we just did was changed all the timing chains (it was out of timing) but the truck still will not start. Help on what could be next? Thanks 31 answers
2002 dodge 1500 4.7 cranks will not start.
2002 Dodge Ram 1500
-
Maintenance & Repair
-
We have a 1999 dodge durango and it will not start. We have changed the crank sensor, coil, distributor, and have tried to reset the alarm and the pcm and nothing works. Please help!!!!!!! 2 answers
We have a 1999 dodge durango and it will not start. We have changed the crank sensor, coil, distributor, and have tried to reset the alarm and the pcm and nothing works. Please help!!!!!!!
1999 Dodge Durango 4 Dr SLT 4WD SUV
-
Maintenance & Repair
Shortcuts
- Mainenance & Repair Questions
- All Questions
- Ask a Question
Search Maintenance & Repair Questions
Maintenance & Repair Experts
-
#1Tom DemyanReputation200,590
-
#2dandyounReputation101,350
-
#3tennisshoesReputation89,120
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.