Changed the clutch cylinder in my 96 cavalier. Now the clutch won't budge. The rod won't even move to bleed it. Please help.

Changed the clutch cylinder in my 96 cavalier. Now the clutch won't budge. The rod won't even move to bleed it. Please help. 1 Answer

I changed the clutch cylinder in my 96 cavalier now the clutch won't move. Not sure what I did. Please help. 3 Answers

Ignition was changed in my Ford focus 2002 it turns but when I push in the clutch it won't turn 2 Answers

I lost my keys to my Ford Focus 2002 so I buy a ignition to put in I change the ignition and then it turns the key the key turns but when I put on the clutch it won't turn

Hi I have a 2001 hydyia elantra, it's manual and today I've had to replace the batter. my main concern is when I was driving my car it made a little noise then my car just stop moveing. the engine was still running and was fine but the car would just rev up and did not move does this mean the whole clutch is bad or maybe the clutch plate?? And when I let go of the clutch in gear it did not stall out like it should have it didn't even move or rev just sat there please help me asap!! 2 Answers

Hi I have a 2001 hydyia elantra, it's manual and today I've had to replace the batter. my main concern is when I was driving my car it made a little noise then my car just stop moveing. the engi...

my 93 probe will not start when i push in the clutch,i have replaced the starter, the clutch master cylinder, use to pump the clutch a few times then it would start but not now. 4 Answers

car won't start when i push in the clutch, i am thinking when the old clutch master cylinder was leaking fluid may have gotten in to the clutch position switch, any ideas?