If I were you, I'd clean and inspect the VVT Solenoid first. Dirty or clogged screen can cause this code too. You'll need to loosen the power steering pump to remove it, which is easy enough.
Thank you. I removed the solenoid this morning. Check screens put on some jumper wires and it does work. Check with volt meter it’s getting 5volts. Does the pcm provide the ground for the vvt and the cooling fan
Replaced cam position sensor because of code p0017, cleaned throttle body, and replaced cooling fan
Chevrolet Trailblazer
-
Maintenance & Repair
Gauge cluster won't move when trying to turn back over, battery light is on. can anyone tell me what might or may be broken? replaced neutral, crank, and camshaft sensor. scanner tool can't connect ...
2002 Chevrolet Trailblazer LTZ 4WD
-
Maintenance & Repair
I just had the oil changed and still did it. doesn't do it when I drive short distances but if I go prob more than 10 min it will do it. then if I let car cool down and drive it , it does it again
2006 Chevrolet Trailblazer
-
Maintenance & Repair
I have a 2006 Chevy trailblazer it has problems starting or when it does start it goes about an eighth of a mile and cuts out and the check engine light with a downward arrow indicator pops on my ...
2006 Chevrolet Trailblazer LS 4WD
-
Maintenance & Repair
I have a 2006 Chevy Trailblazer that is giving me some issues. I have a recall out on the Driver's Side Window control, which a part is on order for. (This may or may not be relevant) Today, I was in...
2006 Chevrolet Trailblazer LT 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.