1955 Chevy six cylinder won't start
The coil won't discharge when distributor rotates, but I can fire the coil when I
brake the points with a screw driver
does the rotor have carbon tracks on it and is the ignition gap set right
No carbon tracks. Gap at 16k
not the ohms the space between the ignition points
16k of an inch
Sound like the cam on the distributor shaft is not opening the points correctly, probably need to take the distributor out and give it a good inspection, probably worn out. Gap setting should be .018 but that is only .002 smaller gap. Are the points & condenser new? And like crumbob was asking if you see carbon, burn spots, look under the rotor for a burnt spot. We just need more info
.016 is .002 smaller gap from .018 just to be clear...
More info tomorrow, raining cats and dogs here now
Looking for a Used C10 in your area?
CarGurus has 135 nationwide C10 listings and the tools to find you a great deal.
Search Chevrolet C10 Questions
Chevrolet C10 Experts