Can I fit the wheels from a Toyota MR2 to a BMW 328i
iv seen this question quite afew times , in short no one on here knows...i can tell you how to figure it out your self though. first count your lugs they have to be the same on both cars then mesure from center to center on any two lugs thak mesurement has to be the same on both cars if all that is good you have half a chance the only other things you have to check is the offset and center hub diameter . first center-hub diameter is the hole directly in the center of the rim if the center hole on the rims you want is as big or bigger than the hole in your rims then your good . last your offset mesure from the center of the back of your rim to the out side lip(do this streight up dont lean tape mesure)if numbers match your good if they are close your probly still good +/- 1/8 there is a way to check but i doubt these rims will fit any how
No. I am quite sure that all BMWs are at least 5 lugs, and the MR2 is a 4 lug setup.
Search BMW 3 Series Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
BMW 3 Series Experts