I Have a ford sierra 2ltr DOHC, and have skimmed 10 thow off the head so will valves hit the pistons when assembled.

Asked by Apr 24, 2012 at 03:05 PM about the Ford Sierra

Question type: Maintenance & Repair

1 Answer

65

no. But as an extra control feature, there is a brass bush inserted in the cylinder head to indicate the maximum you can skim. You shouldn't skim the head beyond the face af this bush. Hope this helps.

Your Answer

Add photo

Related Questions

  • 2000 dohc rough idle 8 answers

    I am working on a 2000 Taurus with the DOHC 3.8 that is missing very badly and stalling at idle. The car originally had a code for insuffient EGR flow, and I replaced the EGR solenoid and it did't se...

    2000 Ford Taurus SEL

    -

    Maintenance & Repair

  • I have a Ford 1997 Taurus (12v, head over valve, 3.0L, Vin# U) and have a question about the thermostat 2 answers

    I try to replace the thermostat and when I took out the thermostat I'll see its head facing the engine's block and its tail (the part with spring and a rod) facing the radiator. But I look at the oth...

    1997 Ford Taurus GL

    -

    Maintenance & Repair

  • Replace Head Gasket on F-350 Ford 351C 3 answers

    1978 Ford F-350

    -

    Maintenance & Repair

  • Headlight Assemblys 4 answers

    Headlight Assemblys have moisture inside them ,need to be replaced. Will the assembly off of a 2005 with the clear lens covers fit on a 2001???

    2001 Ford Escape XLT

    -

    Maintenance & Repair

  • can you put a v-tech cylinder head on a non v-tech engine 2 answers

    i have a cracked cylinder head and i ordered another which i thought was rebuilt but only used but he says (mechanic) says its a v-tech and the rocker assembly isnt the same, will it still work or i...

    1998 Honda Civic EX

    -

    Maintenance & Repair

Search Ford Sierra Questions

Ford Sierra Experts

#1 Šjor Viđak
Šjor Viđak
Reputation 20
#2 Tom Demyan
Tom Demyan
Reputation 10
View All