I cannot locate my 2008 Ford Explorer Sport Trac OBD II computer port. Yes, I know I am probably stupid, but can you point me to the location?

I cannot locate my 2008 Ford Explorer Sport Trac OBD II computer port. Yes, I know I am probably stupid, but can you point me to the location? 4 Answers

How can I tell whats wrong with my clutch on my 2003 Ford Explorer Sport Trac? 3 Answers

I got in my truck the other night, pushed the clutch pedal down & started the truck. I heard a loud winding noise which may or may not have been related to my problem. After the truck started the clut...

I have a 2008 Ford Explorer Sport Trac 4x4 4.6L V8, i drive for work a lot, the other week i am going down the highway at about 70mph and start to switch lanes ( turning slightly to the left) on a left turning curve, all of a sudden my steering whell breaks over slightly and i hear a intermitent grinding noise. When i turn back to the right the noise stops. Now tonight on my way home i am driving straight down the road and my whole truck starts to wobble extremely hard, i mean the front is moving left and the rear is moving right and going back and fourth until i turn the wheel to the left or right. Im not sure what it could be possible wheel bearings? ball joints? something in the steering? 19 Answers

I have a 2008 Ford Explorer Sport Trac 4x4 4.6L V8, i drive for work a lot, the other week i am going down the highway at about 70mph and start to switch lanes ( turning slightly to the left) on a lef...

my 2002 ford sport trac computer is not fully engaging for the obd scanner car had no battery for a while. how do i get modular working 3 Answers

Iw as told if I drove it for a while the computer would start reading fully again. I have gone 150 miles and still not fully registering on obd scanner

I have a 2003 Ford Explorer Sport Trac and my power door locks will not lock the doors from the switch but will unlock them. 1 Answer

My 2003 Sport Trac will not not lock any of the doors when the door lock switch is pressed from any door. If I manually lock each door I can open all doors from using the door unlock switch, is there ...