do i need to take my 2001 mitsubishi elclipse to a dealer to reprogram...there are none in my area. I have a maxdas scan tool set can it reprogram the car?

do i need to take my 2001 mitsubishi elclipse to a dealer to reprogram...there are none in my area. I have a maxdas scan tool set can it reprogram the car? 1 answer

Ok I have a 1992 mitsubishi eclipse gs turbo. It has been sitting up for 10 years. I replaced the ecm computer and the fuel pump relay . It still won't crank. My fuel pump still isn't comming on and I have checked all the fuses that I know to check. The car tries to crank when I pour a little gas in the cylinder. It is driving me crazy trying to figure this out. Any suggestions on what to do now?? 27 answers

How do I know if my injectors are stopped up or not? The fuel pump should be comming on its new so is the relay. Whats wrong?

What gaskets do I need to replace when taking off the upper manifold in order to change the spark plugs behind it on a 2001 Mitsubishi Eclipse GT 3.0 liter? 1 answer

What parts do I need when taking off the upper manifold in order to get to the spark plugs behind it?

I have a 2002 Mitsubishi eclipse, so when I opened my door and sat in the car, smoke was coming out the fuse box, tryes to start the car and it did nothing. 1 answer

I put jumper cables on and I didn't connect it to anything. And the car turned on, I have to put the two jumper cables on to start it, can someone please help me

i was driving my 03 Mitsubishi eclipse gs , and i went to back up from a parking stall and all of a sudden my car wouldnt go in drive or reverse my tie rod on driver side is just hanging there 2 answers

cotter pin is missing. how the hell do i fix this without paying out my ass... the nut and cotter pin are missing.