how to remove the driver's front seat on buick lucerene?
Most seats have mounting bolts on the floor. If you want to remove entire seat assembly I would lubricate the bolts on the bottom of the vehicle as well.
By bottom of the vehicle you mean
By bottom of the vehicle you mean inside or under the vehicle?
Well, you unbolt the seat from the inside of the vehicle but the bolt threads go through the body to the outside underneath the vehicle. I recommend people to spray some lubricating spray on the bolt threads because they can be rusted and seized.
I see that in the glide track some round headed pins or bolts but no way to attach and tools to unscrew them. Is this the mounting bolts you are referring to?
do you have a diagram showing the location of the bolts? Thank you for your help.
The glide track assembly is considered one piece. Look on the floor where the carpet is and there should be four mounting bolts there two in the front and two in the rear.
No. In this case only two in the back. To get the seat out, tilt the seat forward after the two bolts in the back are out, thne one at a time pull the front mounting brackets up and to the rear of the car by grabing the seat and pulling. The track will pop right out.
Looking for a Used Lucerne in your area?
CarGurus has 3,076 nationwide Lucerne listings starting at $2,400.
Search Buick Lucerne Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Buick Lucerne Experts