Check engine light

Take the engine cover off. Left hand side toward the back of the motor are two solenoids. One has a gray top the other has a black top. Engraved in the motor next to them shoud say IN for one and EXH for the other. The intake one needs to be replaced. Take the conector off the top and the use a 10mm socket to take out the bolt holding it in place. Wiggle the solenoid back and forth and work it up and out of the hole it sits in. Put the new one in using the opposite steps. Dab a little oil on the o-rings on the new one so it will slide in. You can get these at your local parts store or order them online. They are pretty cheap so I replaced the exhaust one at the same time. The picture is the Intake side that throws the P0010 code.