My radio is saying code

2003 mitsubishi Diamante NO CRANK, NO START! Car was running fine got gas and it stalled a few hours later. Jumping didnt work, replaced fuel filter, fuel pump is working, tried banging on the starter still NOTHING......Checked diagnostic and no codes found. Please help any info at all idk what else to do 5 answers

High idle 1 answer

High idle. Have changed plug plug wires rotor cap idle control valve and vaccum hoses don't know what els either could be. Any suggestions

REPLACED FUEL PUMP, STRAINER, AND FILTER AND ALSO FUEL PRESSURE REG-CALIBRATOR AND STILL HAVE TROUBLE STARTING CAR---WHAT'S WRONG? 3 answers

NO CODES ARE SHOWING UP WHEN CAR IS PLACED ON THE MACHINE THAT TELLS WHATS GOING ON WITH IT. I'VE TAKEN IT TO 2 PLACES TO HAVE IT TESTED

My car will crank but won't move when you put it in gear and I don't know what to do nor do I know much it's going to cost me.....really trying to go cheapest route 8 answers

My car is a 2002 Mitsubishi diamante ls

Help with code E Com code 1 answer

I've installed an six input cuz car did not come with one but after instalation it worked perfect for months now radio won't work nor even get power to radio selection. I've checked fuses, wiring...