what transmission will replace a 2006 4.6 interceptor tranny
Those trannies are heavy duty for the interceptors, if you just put in the regular tranny it most likely won't last long. Try B&M Transmissions for a good heavy duty tranny. Or have yours rebuilt, if the case is good you might save yourself a few bucks.
Ford 4R75W is what it has. Replacement needs to be the same as it is controlled by the ECM.
Pick and Pull site online lists transmission for cheap. Gears and dimensions have to be the same. The part number is usually located on the transmission or available with Vin number online. Some vehicles list specs in the owner's manual. Buying a cheap one replace and rebuild or WHY cheaper than new.
05 to 08. Has to be an interceptor transmission not because it is heavier duty, it's not, but because the output shaft and tail housing are longer on the interceptors then regular Crown Vics and Grand Marquies due to the use of an aluminum driveshaft.
I have a 2006 ford crown victoria police intercepter. My tranny went out and its extremely difficult to find my year thats not cost my my arms. Lol. Would a 2000 tranny work if its police pakage as well? Or any other year for that matter
Has to be from an 05 to 08 and be from another interceptor. Cannot use an 04 or earlier due to your car which has drive by wire throttle, that started in 05. 09 has changes also that won't work with your PCM.
Looking for a Used Crown Victoria in your area?
CarGurus has 875 nationwide Crown Victoria listings starting at $1,496.
Search Ford Crown Victoria Questions
Ford Crown Victoria Experts
Related Models For Sale
Used Cars For Sale