My truck keeps turnin off by itself it runs good for a couple second and then trys to cut off it started after I jacked the motor up to change oil pump what could be the problem?

My truck keeps turnin off by itself it runs good for a couple second and then trys to cut off it started after I jacked the motor up to change oil pump what could be the problem? 1 Answer

my truck just makes a loud continuouse clicking noise when I try to start it up. but the lights and things still work fine when not started up yet. what could be the problem? 1 Answer

my truck just makes a loud continuouse clicking noise when I try to start it up. but the lights and things still work fine when not started up yet. what could be the problem?

What could be the problem with my f-150 that it won't start because the gauges on dashboard for temp,oil,speed,rpm,and fuel they are locked they won't move at all when turnig on the key 38 Answers

And because of that the truck won't even try to start until playing with the ignition switch back and fort and allowing it to cool off a little then the gauges start moving again and then truck st...

i replace the motor in my 2001 ford f150 truck ran good for a while then the motor turned red turned it off now it want start at all can someone tell me what to do next . do i get another motor are is it something else. please help running out of options. 2 Answers

truck want start even if jumped off. changed motor, starter ,oil change, but i don,t know what else to do. the motor turned red and now it want start it turn over but want start

I have a 1977 ford f150 with a 351 engine in it. It dies sometimes and has trouble starting again, as if fuel isnt getting to the carborator. I have replaced the tank,fuel pump, fuel filter at engine and behind pump. what could be the problem? I am a frustrated 17 year old wanting to know how to fix his truck 7 Answers

It dies sometime and has trouble starting. I have replaced the fuel tank, fuel pump, fuel filters behind pump and on engine. as if no fuel is reaching the carborater but when i check if lines are push...