Frontons shacked replaced pads but the two bolts in back do they attach to the rotor are is the bearing the only thin holding rotor in place ?
5 Answers
Rowefast answered about a year ago
Not sure in your terminology, but I believe there is a bolt, screw, holding the rotor onto the hub, screw located between the lugs. Three bolts behind the spindle hold the hub and bearing assembly on.
Rowefast answered about a year ago
I think I got it, also it is your wheel when you bolt it on also holds the rotor in place.
Rowefast answered about a year ago
Man I am trying to help here, there are 2 bolts that hold the break caliper on and there are 2 bolts that hold on the bracket for the caliper. What are you trying to do?
Boss603 answered about a year ago
Iam sorry , should have proof read ! Front shacks , replaced brake pads noticed threaded holes in rotor ! Is there bolts that tread into rotor from back ?
Rowefast answered about a year ago
Nothing bolts to the rotor, except the wheel and maybe a set screw in-between the lugs.
Your Answer
Related Questions
-
Frontons shacked replaced pads but the two bolts in back do they attach to the rotor are is the bearing the only thin holding rotor in place ? 5 answers
Vehicle is a f150 Platinum super cab F150 4+4
2010 Ford F-150 FX2 SuperCab
-
Maintenance & Repair
-
I have a 1994 ford f150 straight 6 4.9 liter I believe. we are getting no fire to coil. we have replaced coil, ignition mod, new plugs checked the rotor looks fine plugs are not fouled. my son was driving and the truck lost all power and there is a burned wire smell in the cab strongest under dash drivers side no fuses are blown and cannot find any burned wires can anyone help with my next step?? 9 answers
burnt wire smell in the cab have checked fire to coil its not getting any. changed ignition module still no fire changed coil and plugs still nothing no fuses are blown that we can see cant locate ...
1994 Ford F-150 XLT LB
-
Maintenance & Repair
-
there are 6 torx head holding ring on the rotor but two are broken! a horrible noise present when driving& gets worse the faster you go. i don't know what to check or parts to order. 1 answer
6 torx bit screws holding disc onto the rotor-two heads broken off? bad low growling noise gets progressively worse the faster acceleration. is this wheel bearing? I don't know what parts to order? ...
2002 Ford Windstar LX
-
Maintenance & Repair
-
where in the transmission is the electronic pressure control solenoid? 1 answer
Is it under the pan, or does the trans. have to be completely removed in order to replace the (epc) solenoid?
2001 Ford F-150 XLT Extended Cab SB
-
Maintenance & Repair
-
I changed the CV half shaft on the passenger side of my truck. I had to remove the lower shock bolt to to remove and install new half shaft. The problem is I can't get the bolt back in the shock mount 1 answer
Is there a trick to compress the coil spring? Thanks.
2008 Ford F-150 XLT SuperCrew SB 4WD
-
Maintenance & Repair
Looking for a Used F-150 in your area?
CarGurus has 207,332 nationwide F-150 listings starting at $1,499.
Shortcuts
- Ford F-150 Questions
- All Questions
- Ask a Question
- Ford F-150 Reviews
- Ford F-150 For Sale
Search Ford F-150 Questions
Ford F-150 Experts
| #1 |
|
OJ
Reputation
8,210
|
| #2 |
|
dandyoun
Reputation
4,390
|
| #3 |
|
tennisshoes
Reputation
2,860
|
Related Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.