fuel filter

1. Preparation (1) Remove the 2nd left seat (Refer to "Seat" in BD group). (2) Open the carpet (A) for fuel pump and remove the service cover (B) for fuel pump. [See large image...] (3) Disconnect the fuel pump connector (A). [See large image...] (4) Idle the engine and wait until fuel in fuel line is exhausted. (5) After engine stops, turn the ignition switch off. 2. Disconnect the fuel tank pressure sensor connector (A) the fuel

fuel filter is at back above -in front af gas tank.

Removal 1. Preparation (1) Remove the 2nd left seat (Refer to "Seat" in BD group). (2) Open the carpet (A) for fuel pump and remove the service cover (B) for fuel pump. (3) Disconnect the fuel pump connector (A). (4) Idle the engine and wait until fuel in fuel line is exhausted. (5) After engine stops, turn the ignition switch off. 2. Disconnect the fuel tank pressure sensor connector (A) the fuel tube feed quick-connector (B). 3. Remove the fuel pump from the fuel tank after removing the installation bolts (C). Installation 1. Installation is the reverse of removal. -------------------------------------------------------------------------------- Fuel pump installation bolt : 2.0 ~ 2.7 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lb-ft) -------------------------------------------------------------------------------- When installing the fuel pump module, be careful not to get the seal-ring entangled. 1. Preparation (1) Remove the 2nd left seat (Refer to "Seat" in BD group). (2) Open the carpet (A) for fuel pump and remove the service cover (B) for fuel pump. (3) Disconnect the fuel pump connector (A). (4) Idle the engine and wait until fuel in fuel line is exhausted. (5) After engine stops, turn the ignition switch off. 2. Disconnect the fuel tank pressure sensor connector (A) the fuel tube feed quick-connector (B). 3. Remove the fuel pump from the fuel tank after removing the installation bolts (C). Installation 1. Installation is the reverse of removal. -------------------------------------------------------------------------------- Fuel pump installation bolt : 2.0 ~ 2.7 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lb-ft) -------------------------------------------------------------------------------- When installing the fuel pump module, be careful not to get the seal-ring entangled 1. Preparation (1) Remove the 2nd left seat (Refer to "Seat" in BD group). (2) Open the carpet (A) for fuel pump and remove the service cover (B) for fuel pump. (3) Disconnect the fuel pump connector (A). (4) Idle the engine and wait until fuel in fuel line is exhausted. (5) After engine stops, turn the ignition switch off. 2. Disconnect the fuel tank pressure sensor connector (A) the fuel tube feed quick-connector (B). 3. Remove the fuel pump from the fuel tank after removing the installation bolts (C). Installation 1. Installation is the reverse of removal. -------------------------------------------------------------------------------- Fuel pump installation bolt : 2.0 ~ 2.7 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lb-ft) -------------------------------------------------------------------------------- When installing the fuel pump module, be careful not to get the seal-ring entangled

How do you remove the seat