I recently removed HID bulbs ands wires, now my regular passenger side low beam right will not come on. Please Help!! keep getting pulled over!!

I recently removed HID bulbs ands wires, now my regular passenger side low beam right will not come on. Please Help!! keep getting pulled over!! 2 answers

2002 dodge ram 1500 4.7 once started will not keep running. I replaced the timing chain (to top dead center.) now it seems to be sputtering and missfiring. am getting 2 codes. 1491 and 0351. I have thus replaced idle air control sensor. maf sensor, tps sensor. all distributor coils, injectors, pellenum, carb intake. it seemed to hold an idle for about the first 20 minutes(was running rough and misfiring.) now it will start but only when pressing gas, and have to play the peddle to keep it going. when i pulled off the cylander 1 coil plug it seemed to run alot smoother but still wouldnt stay running by its self.

I replaced the timing chain (to top dead center.) now it seems to be sputtering and missfiring. am getting 2 codes. 1491 and 0351. I have thus replaced idle air control sensor. maf sensor, tps senso...

I had a low beam out on my 97 dodge ramm pickup so I drove with hi-beam the whole time. Last night all lights were out and now no low or hi beam work, blinkers and rear lights work....i replace bulbs 1 answer

after driving with only hi beam (since one of my low beam was out). I came out to find that now no headlights work at all. My blickers work and all my rear lights work. I checked the fuses and all we...

i have a 2001 dodge ram 1500 sport i replace both low beam bulbs and conector sockets passanger side slightly comes on drive just little brighter but high beam staying on 2 answers

high beam headlight staying on driver low beam burning little passenger hardly burning at all could the things I read here have anything to do with that I change bulb and sockets?

my truck will not crank over. 3 answers

My 96 ram will not crank over when I manually turn the key. I have a bulldog remote start I installed myself it worked manually with the key and with the remote start. Now it only starts with the re...