Your Answer:
Related Questions
-
I have a 2004 Ram 1500 w/5.7 HemiTruck has P0700 code and transmission starts in 2nd gear and will not go into o.d. but when I clear the codes the truck runs fine until the codes come on again. Why? 1 Answer
2004 Dodge RAM 1500 ST RWD
-
Maintenance & Repair
-
I have a 2006 Dodge Ram 1500 3.7 liter manual transmission truck. Why is it stalling when I go into 2nd gear to make a turn? I loose power steering and my brakes. I just replaced the battery. Help!!! 5 Answers
When I down shift into 2nd gear my truck stalls and I have no power steering and I loose my brakes as well. I just replaced the battery.
2006 Dodge RAM 1500
-
Maintenance & Repair
-
My 94 dodge ram 1500, 5.2L, runs okay but began using lot of fuel. Had trouble codes 37, 32, and 51. Cleaned throttle body and checked for vaccum leaks or bad hoses. Code 32 gone away. Cleared code 51 which according to Haynes manual is not supposed to make the check engine light come on. Their is no code 37 in the Haynes manual for a gasoline engine on the 94 Ram. Their is for diesel engine. What is it, where is it at and how do I correct the problem. 51 I know is the O2 sensor. Truck runs great, shifts fine , but is still using more fuel than normal. Been reading about code 37 and transmissions, don't think my problem is there. Any help ? 5 Answers
Cannot get the Code 37 to clear, can disconnect the battery and the code 51 clears, The code 32 has not come back but 51 comes back. 37 does not go away. Engine light will not come on after starting...
1994 Dodge RAM 1500 ST RWD
-
Maintenance & Repair
-
When I get into the ram 1500 and start the truck, I step on my brake to pull the lever in gear andm will not move unless I let the insiode of the truck warm up, what's wrong 1 Answer
I start the truck, put my foot on the brake and push down, try to pull down shift lever and won't move until the truck at least inside is warmed up.
2004 Dodge RAM 1500 Laramie Quad Cab 4WD
-
Maintenance & Repair
-
I have a 1998 Dodge ram 1500 just rebuilt the transmission and put it back in the truck. now the truck will turn over but will not start. 1 Answer
i replaced the cam shaft postion senor that did not work.. i am not getting spark but i am getting fuel and compression. i tested the battery it is still good..you can still hear the fuel pump kick on...
1998 Dodge RAM 1500
-
Maintenance & Repair
Own this car?
Share your experience with others.
2004 Dodge RAM 1500
Shortcuts
Search Dodge RAM 1500 Questions
CarGurus Experts
-
#1Dan ConnellReputation19,880
-
#2dandyounReputation15,170
-
#3Gene ArnettReputation11,710
Know more, shop wisely
SearchRelated Models For Sale
Used Cars For Sale
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.