Misfire in cylendar 5
I have a 1998 dodge 1500 5.9 litre with a misfire in 5. I changed the plug, wires, fuel injector, fuel injector top electrical plug and checked the fuel pressure. The pressure is fine and stays consistant. It smoothes out and runs fine after the rpm's are above 1000. Any ideas?
Possible coil for that cylinder? or compression may be a bit low.
Anything I can do for the compression if that ends up being the problem? Maybe some build up that some injector clener or some thing I can add the fuel or oil?
The only thing I can think of would be carbon build-up on the valves, could try a cleaner of some sort to run thew the gas, I think I would do that first before compression results, you would want to do a wet test to determine if it is the rings or valves.
I Should add on the wet test, you want to know what the compression is before the wet test.
Looking for a Used Ram 1500 in your area?
CarGurus has 12,878 nationwide Ram 1500 listings starting at $1,800.
Search Dodge Ram 1500 Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Dodge Ram 1500 Experts