where is the indicator unit or relay

Asked by Sep 10, 2011 at 08:36 AM about the 2005 Ford Bantam

Question type: Maintenance & Repair

5 Answers

775

So the modern cars don't have a clicker unit in any more, like the 2010 Bantam, but if yours have those are usually not to hard to find behind the dash, having your hazards on you shouldn't have trouble getting to it, if its broken, most of the times you'll just hear one click and then nothing. The relay should be in your fuse box marked in the diagram on the lid of the fuse box. hope this helps. if your car is an older model check grounds and clean out the oxidation that might have forms on the fuse/ relay connectors in the fuse box using contact cleaner and a tiny little screw driver. be careful though not to bend any contactors. hope this helps

6 of 6 people found this helpful.
115

On my 2006 1.6 XLT the relay sits in the steering column, directly under the indicator arm. Very easy to get to.

8 of 8 people found this helpful.
40

AND THE WIPER RELAY?

1 of 1 people found this helpful.

Good day I need to find out where the Wiper motor is located on a Ford Bantam 2012. Its a Rocam engine.

on the firewall.inside the engine compartment

Your Answer

Bantam

Looking for a Used Bantam in your area?

CarGurus has thousands of nationwide listings and the tools to find you a great deal.

ZIP:

Ford Bantam Experts

  • #1
    Janus Welgemoed
    Reputation
    620
  • #2
    Joel Mearns
    Reputation
    560
  • #3
    MrRocket12
    Reputation
    470
View All

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use.