Master cylinder


Asked by Mar 25, 2016 at 11:57 AM

Question type: Maintenance & Repair

I have a 2008 Silverado.when I apply the
brakes they go to the floor.I could pump
them up but now the peddle still goes to
floor.I checked for leaks and found
none.After pumping them what little bit of
brakes I have seems to hang up for a
moment.Could this be a master cylinder

1 Answer


If the brake fluid level has not gone down in the master cylinder, then yes, chances are it would be the master cylinder.

Your Answer

Add photo

Related Questions

  • Master cylinder??? 2 answers

    I a stop light and my brake pedal went straight to the floor... I get some pressure but it dissipates really quick and there is fluid in the master cylinder.. Help

    2006 Ford Escape XLT


    Maintenance & Repair

  • Do I need a new master cylinder or a porportionaing valve? 1 answer

    My master cylinder on 1976 Eldorado occasionally drips, the brake pedal is soft and the brake light comes on once in a while. If I push hard on the brake pedal the light will go off.

    Cadillac Eldorado


    Maintenance & Repair

  • Master brake cylinder 2 answers

    Can I use a 1 1/16 Master brake cylinder instead of a 1 3/16 master cylinder. I have the 1 3/16 already on

    2003 Ford F-150


    Maintenance & Repair

  • Is it the master cylinder? 8 answers

    Replaced front rotors and brake pads. Went to depress pedal and it went to the floor. Did not come up after pumping. Did not take any lines off, only compressed pistons to accomodate new pads. Pum...

    2008 Chevrolet Silverado 1500 LT1 Extended Cab 4WD


    Maintenance & Repair

  • Master cylinder 1 answer

    What exactly does your master cylinder do for our vehicle,just trying to do some research,thanks

    Chevrolet Blazer




Search Maintenance & Repair Questions

Maintenance & Repair Experts

#1 Tom Demyan
Tom Demyan
Reputation 145,980
#2 FordNut
Reputation 100,910
#3 dandyoun
Reputation 82,440
View All