My 71 super beatle doesn’t go up hill (no power)
I did a tune up but engine still has no power. Starts right up,idles fine, revs up but when I try to go up a hill there’s no power.
Our experts haven't test driven this car yet.
Our experts haven't test driven this car yet.
Our experts haven't test driven this car yet.
Our experts haven't test driven this car yet.
Our experts haven't test driven this car yet.
Our experts haven't test driven this car yet.
I did a tune up but engine still has no power. Starts right up,idles fine, revs up but when I try to go up a hill there’s no power.
I changed the battery in my 1971 Super beetle and it sparked and blew the radio. It also caused the Generator light to stay on when the car is off. I have to unplug the cable from the Voltage Regulator to the battery or it kills the battery. I replaced the voltage regulator, but that did not fix it. Help!
VW super beetle 1971 (TL 1.6L) cylinders 1 & 2 not working. Engine was recently re-bult with 88 mm cylinders and had been working good for about a day or so. Heads were re-build. new carburator. I have verified compression (>120 psi), timing, it has spark to all cylinders, anyway had replaced coil and distributor, spark pulgs and cables, verified valve calibration, firing order, etc. but still these two cylinders do not work. Any ideas or suggestions on where to look, will be greatly appreciated.
I have a 1971 vw super beetle! My question Is it cranks like it want to start but doesn’t! I was thinking it was the battery so got a new one an still the same thing! if the spark plugs are not on right would that be the case!
I have a 71 VW Super Beetle with stock engine. My problem is my carburetor will not fill fuel bowl with gas. It is a new unit, I have replaced fuel pump and fuel tank. I have checked fuel line from tank to pump with compressed air and it is clear. Oddly, this is the second new carb I have installed with the same problem with both. I removed fuel line form carb and placed in a bottle to che k fuel flow from pump and there is sufficient flow. I can pour gasoline into fuel vent on carb to fill fuel bowl and car will run fine until fuel bowl is empty. It seems that needle valve is not opening to allow fuel to flow into bowl, but it is odd that two carbs would have the same problem. Any ideas? Thanks !