Saturn S-Series Questions Any type
I Have A 2002 Saturn SL2, The Lock Cylinder Doesn't Work Well. I Have To Tr...
I have a 2002 Saturn SL2, The lock cylinder doesn't work well. i have to try to turn so many time in order to turn the key to start the car. I have checked with auto zone, the new lock cylinder does...
How Important Is The Cabin Filter
cabin filter deteriorated
I Start My 1999 Saturn Sl2 And It Goes To 3500 R.p.m.s And Stays
what is causing my saturn to idle at 3500 r.p.m. . iI replaced the iac alsotbs and checked vacumm lines. i unpluged map sencor , it lowered to 700 rpm and tried a new one. rpms still at 3500.
2000 SL-1 A/C Clutch Engages Only When Fan Is On And Defrost Is Selected. A...
A/C clutch will not engage when fan directional sw is in any position but defrost. When A/C sw is on and indicator light is green with fan on and fan directional selector sw is not in defrost, no powe...
Need To Figure Out Why My Fan Doesn't Work
I replaced the relay and the cooling tempature sensor and its still not working
I Start My 1999 Saturn Sl2 And It Goes To 3500 R.p.m.s And Stays
what is causing my saturn to idle at 3500 r.p.m. . iI replaced the iac also the TBS checked vacumm lines. i unpluged map sencor , it lowered to 700 rpm and tried a new one. rpms still at 3500.
I Have A 99 Saturn Sl1 Am I Able To Swap A 97 Saturn Sl1's Engine Into It W...
I'm switching a single cam to a twin cam
What Is Wrong With My '98 SW1?
I have a 1998 sw1. It runs really well till recently. It's an automatic but it seems like some days when I step on the gas it doesn't shift properly and at times gets almost to the red on the tac ...
How Long Should An Air Compressor In A 2002 Saturn Last?
I had an air compressor put in about 4 years ago & it has stopped putting out cool air. I had the Freon checked and it does not need any. I am hoping it is just a leak and not needing a new compressor...
Serpentine Belt On 1997 Saturn SL-2 Won't Turn
I just replaced a bad water pump on my 97 SL-2. I put the serpentine belt back on, but now it won't move. None of the pulleys turn. Is my tensioner too tight? The bolts go into an aluminum head and ...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.