Chevrolet C/K 10 Questions Any type
Truck Won't Go Into Gear Unless In 4L
Bottom line - I was in 4Hi ... I was having trouble backing up on some ice... I put the truck into 4Lo and started to pull out and I heard a loud clang (metal on metal). Now, my truck won't go into g...
Interior Light Stay On, On 86 K10
I have a 1986 k10. My interior light wont go off when you pull out the headlight switch. They dont come on until you pull out the switch. But then i cant make them go off. I have already replaced the ...
Drums For Disc Brakes On Front?
I own a 68 that I want to swap out the front brakes to disc. Junk yard hunting, witch swap out and do I need spindles also?
Anyone Know Where To Get A Intake Manifold For A Inline 6?
My truck, 66 C10, original motor and trans, long wheel base, converted from stepside to feetside. Should be painted in the next few weeks, new pictures up soon.
Engine Swap
i have a 1973 Scottsdale... and wondering what wiring harness i need to install an LT1 motor. i was told that i need a new one.
Value 402 Big Block
1968 chevy c10 w/ 402 big block.
Dash Vents
i have a 1986 Custom CK that i have done myself and have had it 10 years,but i need 3 vents that go in the dash and cannot find them. Any ideas? Thankyou in advance. Tom
Chevy Trucks
whats diffrent between a scottsdale and a chevy bonanza ?? besides bonanza is all time 4 wheel
WEIGHT
WHAT IS THE WEIGHT OF A 67 CHEVY LONGBED?
I Have A Stock 1968 Chevy 4X4 With The 327 And 202 Heads. I Have Replacment...
I am having issues trying to find out about my grandad's 1968 Chevy 4x4. I know it has the 327 with the 202 2brl stock engine. He bought spare parts for everything on the truck and put them in the cam...
77' Chevy Engine Swop
Hello, My name is Mike. My uncle and I are planing to put a 91' 350 EFI With Computer Small Block Engine in my 77' Chevy Cheyenne Stepside. As Of right now it has a L6 250CI Engine with a 3 speed Manu...
Vehicle Weight
I have a 1979 GMC K/10 Long Bed sitting in NC. It has a 350 and is minus a tranny and transfer case currently. I need to tow it back to VA. I have a 2004 Trailblazer LS 4WD with a 4.2 I6 Vortec and...
Does Anyone Know Of A Reputable Mechanic In Or Near Livermore, CA That Work...
I am having some ride problems (I feel increasing "pulses" in the steering wheel as I drive-it's parked until I can find a good mechanic), and was wondering if anyone knew of a reputable mechanic who ...
How Hard Is It To Drop A 6.5l In To A Truck That Had A 6.2l In It Originall...
id like to here from any of you guys who now how hard it would be to put a 6.5 in where there was a 6.2 originally i got a 355 in it now and would like to take it back to a diesel but dont want the 6....
Problem With Getting The Truck Into Gear.
Im having trouble with getting my truck into drive. its a 1985 K10 with an automatic. I can get it into park, reverse, and neutral no problem but i have trouble getting the shifter down to drive and t...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.