I have a 97 Chev K1500 5.0, changed plugs and wires and now is backfiring when I give it gas, firing order??

I have a 97 Chev K1500 5.0, changed plugs and wires and now is backfiring when I give it gas, firing order?? 2 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...

okay so I just did my tune up. I drove the truck yesterday and it drove fine. everyone keeps telling me that the timings off. but I have everything in the right firing order and now its not starting its back firing and now I have smoke coming from under the hood. the spark im getting is an orange color. the truck is acting like it wants to start the motor turns but it wont completely start. please help! 4 Answers

just changed spark plugs, cap, rotors, and wires. the truck ran fine and started fine just yesterday. Chevy C1500, Motor350 5.7 V8.

I have a k1500 chevy pickup with a 350 motor It will not start all the time and shuts off when coming to a stop sometimes. 1 Answer

There is no ground single coming from the ecm to the injectors. I have replaced the ecm and throttle position, air idle, and map sensors. I also checked the ground wires and cleaned the conections.

My 89 chevy k1500 350 TBI will die after it runs for a bit and warms up then when u wait a couple minutes itll fire back up. any help? has new fuel filer, plugs and wires, cap and rotor, and new starter. 4 Answers

My 89 chevy k1500 350 TBI will die after it runs for a bit and warms up then when u wait a couple minutes itll fire back up. any help? has new fuel filer, plugs and wires, cap and rotor, and new sta...