Ford Bronco II Questions Maintenance & Repair
- Recently Active
exchanging the 2.9 engine with a1996 explorer
86 Bronco II 5 speed trans. when you push in clutch to shift gears it is normal, but when releasing the clutch there is a rattle or clattering. I don't think there is anything wrong with the throw-o...
I am trying to change out the Engine Control Module (ECM) where will I find it?
I have an 84 bronco 2 with a bad engine. It's a v6. 5 speed. 4x4. AND I have a 92 2 wheel drive ranger with a 2.3 liter 4 cylinder. Will the transmission from the Bronco 2 fit into the Ranger...
has new Icm checked the emec. gas shut off and works fine but do smell gas fumes in my vacuum line on fuel reg not sure if whats wrong
88 bronco 2 right front power window regulater will not stay in the plastic holder that connects it to the glass hardware. Where can I find a new one or can this one be repaired?
changed the fuel filter was bad and put cleaner in the tank but drove it about 10miles on the way back it shut off the few mins fired back up
I developed a fuel leak and replaced the rubber hoses from the forward most "quick connect" connection. after this repair the vehicle seemed to run normal, within 2 weeks while driving it seemed to cu...
Search Ford Bronco II Questions
Are you a UK consumer? CarGurus now has a discussion forum in the UK.
Ford Bronco II Experts