2003 Crown Vic Police Interceptor
Will not crank, worked an hour before, next thing i know i go to crank it and it will not run
over. lights come on but will not crank.
Do you mean ,engine want turn or engine will turn and no crank?
Somebody should test the voltage in the battery. A battery can fail instantaneously. If the battery tests fine, and if Ford was still using the remote starter solenoid in 2003, one can jumper across the solenoid to verify that the starter engages and cranks. If that happens, my guess would be a problem in the ignition circuit. Maybe a broken wire in the steering column or a failed fusible link.
Get a hammer and try hitting the starter a few times. If it then starts, the starter is bad. I'm assuming that the lights stay nice and bright when you try to start it? HTH. -Jim
Check the ignition fuse.
Check the battery and battery connections first. If that is all goo then try starting it in neutral, the neutral safety switch could be the issue. Also check the battery connection to the solenoid mounted on the starter.
Looking for a Used Crown Victoria in your area?
CarGurus has 985 nationwide Crown Victoria listings starting at $2,990.
Search Ford Crown Victoria Questions
Ford Crown Victoria Experts