Jeep Wrangler Questions Any type
- Recently Active
I was told by two different tire dealers this would work without any modifications.
I replaced temp. gauge and sending unit. has correct sending unit.
Lights power on, starter turns over when jumper relay, battery tests good, system is not recognizing the PCM receive error when using ODBII reader and code 0602 using odometer shortcut.
Has new starter & battery. Trying new starter relay now...any ideas if that doesn't work?
this happens to my car jeep atleast 3 times a month this morning was the 1st time it happened to my wifes jeep it always ends up starting but im afraid one day it wont.
When should I use overdrive versus turn it off?
Oil was changed recently. On way home from work 'check guages' light came on after the oil pressure guage dropped to '0'. Intermittently the needle will go back up very slowly, then drop back to 0. I ...
Lights go on, horn, etc. I have done this before, cannot remember how. Help
I t ask like it is not getting anough gas, and back fireing really bad, and will not go over 20 mph
i really want one of these
Favorite this topic
Subscribe to Jeep Wrangler questions.
Search Jeep Wrangler Questions
Jeep Wrangler Experts