Dodge Stealth Questions Maintenance & Repair
- Recently Active
Stealth I have a 1992 Dodge Stealth ES. The car ran great until the last three weeks. When the car sat over night it would be hard to start the next morning. Had to pump the gas pedal several ...
I have a 1992 dodge stealth. When the car sat over night and then in the morning, I tried to start it, it took pumping the gas pedal and a minute or two of cranking the engine before it would st...
I need to buy a fuel tank and fuel pump for a 1992 dodge stealth. Where do I begin to look?
Car suddenly started delayed acceleration from a stop and does not seem to be fully shifting into higher or lower gears? Also the Overdrive button stopped registering. Was working fine and all of the ...
I have a 1992 dodge stealth , it cranks and runs good as it idles if I give it gas it sputters I have tunned it up cap, rotor, plugs , wires , driving it I have to play with the gas ,I cant give it m...
1992 stealth. has a bad engine. i found a 1994 engine 6g72.. i was just wondering if i can put the cas. from my 1992 on the 1994 engine
By flooring the gas and even that barely helped. Ive changed the ecm relay, fuel pump, fuses, and nothing. Cranks no start.
The car died during operation,then it had to sit a while before re start.Now it will not start at all.A mechanic checked it out and said fuel pump was bad.Replaced fuel filter and pump yet the car ...
One of my grand kids were playing with the overhead dome light and broke the cover. I have looked everywhere on line for one. I live in a very rurel area in Colorado so I don't have any place to go....
Worked dandy up until a week ago. I can move the shifter left and right but not into gear. There seems to be resistance and occasionally a grinding sound if I pull hard enough(usually in third. Trie...
My fiance has a 1993 dodge stealth sohc, and the oil pan is leaking around the curb on the back side and he's changed the gasket cause the cork gasket was rotting away, and even the new rubber gas...
I bought new hub assemblies for the front and the new ones have 4 bolt holes on the back but as im looking at my old hub i dont see any bolt holes to remove them WTF? i wanted to get this done today
Favorite this topic
Subscribe to Dodge Stealth Maintenance & Repair questions.
Search Dodge Stealth Questions
Dodge Stealth Experts