Chevrolet C/K 10 Questions Maintenance & Repair

  • Newest
  • Recently Active
  • Unanswered
HeavyHalf
0

1979 Gmc 350 Cam Torque

Hi I have a 1979 GMC Heavy Half P/U and would like to know the original cam specs with max torgue and hp at what rpm. I carry a camper on the bed. I think it prduces 275 ft/pounds of torque at 200...

sierrajohn2
5

Exactly Where Is The Switch On The Parking Brake Of A 1978 Chevy K10?

I can't find the switch that turns on the parking warning light on the dash of this vehcile.

backisbill
0

Vapor Locks When It Gets Over 100 What Can I Do

i have tried electric pump lots of different things i was hoping there is something someone has tried that i have not thanks

3 views with 1 answer (last answer 2 weeks ago)
firedup
0

Won't Fire Until I Take Out #1 Spark Plug....

After sitting for a day or two my truck will Not fire unless I take out a spark plug. As soon as I take out a plug and roll it over this will fire up immediately. It has a new cap and coil.

younggun1982
0

My 82 Chevy Truck Dies On Take Off And Does Seem To Have The Power It Shoul...

My 1982 chevy truck 350 small block with an edelbrock 1406 carb has been giving me some issues lately, sometimes on take off it spits and sputters and shuts off. It will start right back up though. ...

17 views with 1 answer (last answer about a month ago)
McGee3006
0

Why Won't My 1985 K10 Start.

I have a 1985 k10 with a 5.7 and a munsy 4 speed manual tranny. It ran fine, and one day I parked it and it wouldn't start. It has a brand new battery and cables as well as a new starter.

23 views with 1 answer (last answer 2 months ago)
jsstewart86
0

Shifting Issues

1985 Chevy K-10 is not shifting correctly. From what I can hear/feel from driving it, it always seems to be in the next lowest gear from what it should be based off of the speed of the vehicle. Sy...

11 views with 1 answer (last answer 2 months ago)
dennydog
0

I Checked The Socket And Bulb They Appear Fine.when I Check The Wires Going...

the previous owner cut all the wires at the back for a trailer hook up not a nice job so I took the rats nest out and have all the lights working right except the right brake light

67 views with 2 answers (last answer 4 months ago)
Frank Hernandez
0

Where Are The Fuel Filters

149 views with 1 answer (last answer about a year ago)
TereC
50

Replacing Tail Lights 1985 Chevrolet Swb

I'm having trouble with my lights. When lights are on my right low beam headlight & right tail & turn signal do not work. But when off turn & brake light. What could be the cause of this. Plus I ...

116 views with 2 answers (last answer about a year ago)
Quinton Morse
35

Bad Oil Pressure Gauge Or Bad Oil Pump?

Ive got a 1985 Chevy K10 with a 305 TPI out of an '86 IROC-Z. Truck has 124,XXX miles and the engine has a little less. My oil pressure gauge is usually around 30 PSI but sometimes it'll drop to arou...

321 views with 2 answers (last answer about a year ago)
n2r8drs
0

Have 1986 Chev K10 Auto Trans Leaks Bad We Replaced The Seal It Still Leaks...

is it possible the seal didnt get put in right. after we replaced the seal we pulled tranny all the way out, pulled the converter out and it was leaking out the seal in the center part.is that normal

382 views with 6 answers (last answer 11 months ago)
1 2 next

Favorite this topic

Subscribe to Chevrolet C/K 10 Maintenance & Repair questions.

Search Chevrolet C/K 10 Questions

Chevrolet C/K 10 Experts

#1 7jimmy7
7jimmy7
Reputation 40
#2 Jonathan Furse
Jonathan Furse
Reputation 30
#2 Bob Beaman
Bob Beaman
Reputation 30
View All