Chevrolet C/K 10 Questions Car Customization
What Type Of Automattic Trany Will Replace The 3 On The Tree With Zero Modi...
I have to get my shoulder operated on and won't be able to drive a manual. have a 64 c10 w/292
Have A 62 C-10 Wit A 327 In It,would Like To Make It Automatic.What Size Tr...
trying to change my manual trans to an automatic
Can I Install A 3.08 Ring And Pinion Gear In The Rear End Of My 64 Chevy C1...
I am currently running a 350 SBC with a 4 speed Muncie and 3.73 gears and would like a higher gear to make it a little better on the highway so I am not running 3,000 RPM at 60 MPH.
Is Heater Core Part Of Coolant Bypass In Chevy 350.
I have a new (to me) 1965 Chevy C10 pickup that seems to be cobbled together. The heater core just sprung a leak, and in disassembly I discovered that the heat control lever Bowden cable doesn't con...
I Found A .030 Over 350 With Flat Tops In My Uncles Garage, That Had Been P...
010 four bolt main block flat top Pistons looks like it was just assembled and from machine shop and stored. There is a little bit of surface rust where there wasn't any oil on it. Looks like maybe ...
Can I Put A 1984 C10 Chevy Steering Column On A 1983 C10 Chevy
I was wondering if I could put a 84 chevy c10 steering column on a 83 chevy c10
I Would Like To Convert My Front Drum Brakes To Disc Brakes. Can Anyone Tel...
need to know which car compatible for swap i heard a camero but which yr
What Problems May Arise With Supercharging A New GM 350 Engine?
I bought the 290hp 350 from a GM dealership as a base model crate motor. I want more power. I don't want to have to mess with routing the exhaust for a turbo, so I'm thinking about adding a super...
What Engine Mounts Work Better On A 1965 Chevy Truck From A Six To A Small ...
I am trying to install a 350 on my 65 chevy truck. It orginally had a six. I was told that the same mount from a six would work for v8 but the driver side mount won't line up to the truck bracket. The...
How To Put A Later Tilt Steering Column Into A 72 C 10
I bought a tilt wheel for 25 bucks from a guy who said it was out of a van and it was suppost to fit my 72 c10............Not so.. the one i got has a sort of D shape and my lower shaft is a round ...
Just Bought A 68 C10 With A 350 In It, It's Carbureted, And I Want To Make ...
I'm a power junky, but I want to be able to drive it on the street still, and I don't want a super crazy cam, a good one, but I don't want a crazy lobey sound.
I Have A 66 C-10, The Motor Gets Hot At Slow Speeds. Do I Need An Electric...
I have a 350 and the fan sits about 3 inches lower and about 8 inches away from the radiator. Can't seem to find a shroud to fit and don't know if it would being so low and far away. Any help woul...
Is UT Okay To Put 305 Heads On A 350?
My 350 has a cracked head and I have a spare 305 laying around and I wanted to see if it was okay to bolt the 305 heads on my 350
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.