need to find an exploded view to put throw out bearing and clutch back together (help)

need to find an exploded view to put throw out bearing and clutch back together (help) 1 Answer

I have a 2003 mitsubishi eclipse gs 2.4l that I need to fix. When I bought the car I knew there was problems with the throw out bearing. I replaced that and the clutch. 4 Answers

While the transmission was out I spun the input shafts and heard a rattling. I investigated more and I had to replace the input shaft bearing. Put it all back together it ran good. But transmissio...

How difficult is it to swap an aftermarket turbo back to a stock one? 1 Answer

The aftermarket turbo in my Eclipse Spyder GS-t is giving me problems, I did not install this turbo. It was installed by the previous owner, everything other then the turbo is in amazing condition a...

need help with aftermarket stereo intallment. my ex cut the wire harness on back of deck. 10 Answers

need help with wire diagram for 03 mitsubishi eclipse and im putting in a sony deck need to know what wire and color go together

I burned my clutch backing up a hill. It smoked and smelled bad. Do I have to replace it immediately? 1 Answer

2003 Mitsubishi Eclipse GS I was traveling down a ramp into a parking garage, but the angle was too steep and I was scraping the front end, so I backed up super slow and burned up my clutch. I wonder...