what should the voltage be on the orange wire that plugs to the crank sensor?

what should the voltage be on the orange wire that plugs to the crank sensor? 2 Answers

1999 jeep cherokee runs rough, stalls no check engine light is on. it has fuel pressure ,plugs cap and rotor are like new the only memory code is po132 o2 upstream sensor reported high voltage what could be the problem? 3 Answers

no check engine light is comming on but hesitates and sometimes stalls plugs,cap.rotor and wires are in very good condition,has good fuel pressure. the only code stored was p0132 upstream o2 sensor h...

what is the correct voltage going to the fuel sending unit on a 1995 jeep cherokee 3 Answers

only getting 5.8 volts on the 3 prong wiring harness terminals going to the fuel pump/fuel sending unit. what should the correct voltage be, car wouldn't start and had no pressure at the fuel rail. ...

i ahve a 96 jeep grand cherookee.it shuts off while driving and has difficulty restarting.changed the fuel pump,fuel filter ,crank position sensor, and cleaned the injectors,what eles could it be/ 1 Answer

changed fuel pump,filter ,cleaned injectors, and changed crank position sensor

What could be the problem?

Having issues starting my jeep on cold mornings it will crank and all the lights are on and won’t jump start either but will start in a warm garage been to the mechanics multiple times and they can...