2000 Jeep Wrangler 4.0 5 speed runs and rpm drop out and dies will not start back till you remove and replace key just got back from dealer said did all they could do has new PCM , CAM sensor , idle

2000 Jeep Wrangler 4.0 5 speed runs and rpm drop out and dies will not start back till you remove and replace key just got back from dealer said did all they could do has new PCM , CAM sensor , idle 1 Answer

Idle control and crank sensor fuel presume good and wires check out good . Plus some times it shows loss of comucation with Crank sensor

2000 Jeep Wrangler 4.0 5 speed runs strong has new PCM new idle control sensor.camshaft . And crankshaft . Runs good for a few minutes and dies will not start till you remove key and reinstall it 2 Answers

Oil pressure drop and engine dies 2003 Jeep Wrangler Rubicon 6 Answers

I just got my Jeep back after a year in Divorce court. Supposedly it was not driven in that time. It was running good a year ago. Regular matinence. Upon shipping my ex said it needed a new battery...

My 2000 Wrangler with inline 6 cyl. has a misfire code on cylinders 3 &5. I had a garage replace the coil pack and spark plugs. Code is back ? Injectors ? 6 Answers

It seems to be running smooth with an occasional drop in rpm at a low rpm. Nothing alarming tho. Could it be the injectors ???

Jeep Wrangler dash lights go on and engine cuts out 1 Answer

When I drive 60-70 mph and rpm above 2 my jeep will cut out and steering wheel brakes and gas pedal lock up. Have taken it to dealer and they say it doesn’t happen when they drive it so they can’t...