1989 Ford Bronco II turn signal

Bought it used and turn signal worked fine
fast forward about a month they didn’t blink.
The turn signal light on the dash lit up dimly
and the actual turn signal may blink once
when the switch is positioned either way and
go back to being off with the signal light
being solid. I replaced both relays and notice
one of the holders for the fuse spade is
pushed into the box. Tested with a continuity
tester and it still got power. Replaced relays
again after trying to pull the fuse holder out of
the fuse box and now no lights light up and
the signals still don’t work either. Also
checked the switch to see if any connection
were loose and they were all solid. Any ideas
would be helpful,thankyou in advance.