engine starting problem
Asked by Elie Jun 05, 2020 at 12:13 PM about the 2010 Subaru Outback 2.5i
Question type: Maintenance & Repair
Hello, I have a problem in my Subaru outback 2010, I put it on scanner there is
no codes, I checked the ignition coils there is no electricity, and the fuel pump
didn't work, the ignition switch and the starter are fine. I checked also all the
relays and fuses and no problem the cam sensor and crank sensors are well
and the timing belt. anyone now what could be the problem thanks.
6 Answers
TheSubaruGuruBoston answered 3 years ago
No voltage into the coil, or at the spark plug leads? You may have a bad coilpack.
No voltage at the coil, by the way the engine sometimes works and sometimes it doesn't.
TheSubaruGuruBoston answered 3 years ago
Dunno. I might look for a salvaged ECM and swap it out just to eliminate that possibility. Gives you a chance to see if a prior flood under the passenger carpet got into it too. You can DIY pretty easily, as no tools are required.
Well, I will replace the ECM, although I send it to an expert to check it. thank you
