2008 commander everything comes on but motor wont turn over
4 Answers
Get a cheap volt meter from any parts store. Check you battery voltage with key off, should be 12.6. Then check it while trying to crank, should NOT fall below 11ish. Give the starter a few taps with a mallet and try to start. If it starts after tapping, chances are your starter is on its way out.
thejeepdoctor answered 10 years ago
diconnect batt cable. reconnect and see if it starts. if it does it needs wireless control module. will have to go to dealer to be programed
PleaseStart answered 9 years ago
Everyone and anyone who is having issues with their Jeep NEEDS to file a complaint with the NHTSA! This is the only way this issue is going to be resolved. We can cry all we want on these forms, but with enough complaints a recall will be issued! I know it sucks because I have all these issues, but PLEASE FILE A COMPLAINT! http://www-odi.nhtsa.dot.gov/owners/SearchResults
2010 Jeep Commander 3.7. Starter will not turn the engine, until starter is hammered , new starter installed , next day will not turn again , Help Please . Dan Dennispr@telus.net.
